Cpu doesn't turn on when pressing power button

Computer doesn't turn on when pressing the power butto

It's not that it doesn't boot, but that the computer simply doesn't turn on. Absolutely nothing happens when I press the power button. Strangely enough, at some point it does turn on. This time it turned on on its own! I never had stability problems, the computer never did turn off when I was using it. Even now when it does start, it works well Press the Power button and see if your computer turns on. If not and the plug indicator is on, it means that your Power button is the thing that isn't working correctly. You may need to open up your computer to check if the connection inside is well, connected or not

Sansaire Sous Vide Circulator by Scott Heimendinger

Turn your computer on if the power button is not

  1. Reach to Power options as in previous step > Click Choose what the power buttons do > Click Change settings that are currently unavailable > Scroll down to Shutdown settings and uncheck Turn on fast startup > Click Save changes 4. Uninstall / Install Battery Driver (Only for laptops
  2. A PC not powering on suggests a dead power supply (which could still put a green light on the motherboard as I understand it), or a dead motherboard. For example if there was a lightning storm..
  3. Why does computer take a lot time to boot after pressing the power button? Depends on the computer, and on the operating system, and what you have designated it to do. The basic startup requires the CPU to initialize itself (might take half a second)
  4. It's a really awful way to start a day: you press the power button on your computer and nothing happens. There are many reasons why a computer won't turn on and often very few clues about what might be the problem. The only symptom is usually the simple fact that nothing works, which isn't much to go on. Lifewire / Grace Ki
  5. Press and Hold the PWR off button for 4 seconds to force a PWR off. Unplug from the wall. IF you see a battery compartment door, then your computer has a removable battery. IF NOT then you do not have a removable battery. Remove any removable battery. Press and hold the power button for 15 seconds to complete the reset. (Re-insert any battery.
  6. Hot glue probably would. Also, instead of just pressing the power button, press and hold it for 4 to 5 seconds and see what happens. If that works, then it likely is a setting in the BIOS Setup Menu. If still no help, then I would suspect the power supply

You may have a faulty Power button. Try disconnecting the power button board cable from the systemboard and then test the button when it is being held operated for continuity by using an Ohmmeter connected to the appropriate cable end connections and pressing the button. Here's a link to the maintenance and service guide for the laptop Power supply light does not turn on or power supply fan does not spin. Disconnect everything from the computer, including the power cord. With the power cord disconnected, press the power button on the front of the computer. Plug in the power cord to see if the computer automatically turns on. The computer turned on and I was able to to.

PC power button won't turn on - Microsoft Communit

You should look for where the Power Switch connector (POWER_SW, PWR_SW or PWSW) connects to it, usually in the lower right area of the motherboard. Normally you will have the POWER SW cable of the box connected to these pins, since this is the cable that is precisely linked to the Power button of the box and that is what makes the PC turn on A loose or unplugged power cable is one of the top reasons why a computer won't turn on. Even though your computer runs on a battery, you should make sure that the AC adapter is plugged in properly, at least during troubleshooting Under Power Options, click the Change what the power buttons do link. Using the drop-down menu for When I press the power button select the action you want: Do nothing. Sleep. Hibernate. Shut. When the processor is running, heat will be generated from the processor. So as to remove that head cooling fans are arranged. So when you switch off your PC, then there is no work for the processor, hence no heat will be generated and hence no need of any cooling fan. So when you press the power button PC fan is stopped This is because of the flea power. Now to clear the residual power you follow the same process as with the laptop. Disconnect power, press and hold power button for about 20 seconds. Then connect the power back and try and see if it still wont turn on. Next on the elimination process

The windows 10 doesn't start the first time I press the power button? When I press the button power for the first time it freezes in the window screen. Then I have to turn it off by holding the power button and turn on again and then it works Donate to my work: https://www.paypal.com/donate?hosted_button_id=LKD8GJFEVL2X If the issue is the power button not working and you can get it to turn on use the f2 key to get to the bios screen. In there find the option to turn on with A/C. Or turn on after power failure. and select it. Then if you run into the power button no turning on, just unplug the A/C and plug it back. It will turn on when the A/C is plugged back in A faulty power supply can result in not enough, if any, power getting to the motherboard, causing the computer to shut off immediately or not turn on at all. Many online computer retailers sell power supply testing units for under $20. In the event of a bad power supply, the only remedy is to replace it with a new one Re: Dell XPS 420 power button flashes orange and won't power up The orange light--flashing or not--means a power problem. The flash/solid was intended to define between power supply and motherboard regulators, but that doesn't work because there are regulator failures that keep the power supply from starting

The holding down of the power button to turn off the pc is controlled by hardware on the motherboard. It really doesn't matter what OS is running, there is a chip that controls that in hardware,.. After everything is disconnected and reconnected, connect only the power cable to the back of the computer, then try turning it on. If the computer turns on, you can turn it back off and reconnect all the cables. Bad motherboard. If the power supply connections look ok, but the computer still doesn't turn on, the motherboard may be bad To turn on/off a laptop without the power button you can use an external keyboard for Windows or enable wake-on-LAN for Windows. For Mac, you can enter clamshell mode and use an external keyboard to wake it up. Table Of Contents shows Turning On Laptop Without a Power Button [Step By Step

Once this is done, press the power button and hold it in that pressed down position for around five seconds in order to drain any power that still remains in your computer before releasing the button. With that done, you should remove the left side panel of the computer case. The means may vary from pc to pc but it usually involves gripping a. To disable Fast Startup, head to Control Panel > System and Security > Power Options > Choose What the Power Button Does. Click the Change settings that are currently unavailable link at the top of the window, uncheck the Turn On Fast Startup (Recommended) option under Shutdown Settings, and then click the Save Changes button Processor: Core 2 Duo E7500 2.93GHz. Ram : 4GB DDR2. OS: Windows 10 64-bit. PCIe: possibly version 2.0. It was working fine until one day it just didn't start up. I thought it has PSU issue the fan wasn't rotating after pressing power button. So I tested it with Paper Clip method as shown here, YouTube. Tech Assault Pressing power button but PC doesn't turn on : However when I press the power button it doesn't start. I know the motherboard is getting power because the light is on and when i plugged in.

PC won't power on. Pressing power button does nothing ..

PC turns on when plugged without pressing on the power button. 2019-01-07, 21:50 PM. It happens that from time to time my computer turns on automatically when plugged without pressing on the power button. Usually I start the computer using the power button but sometimes it turns on automatically and the power button is starting lights white One thing thing that I've always found curious is that sometimes—especially after a power outage—we find a PC that won't boot when the power button is pressed. Usually, the fans will spin up, but it won't POST. Our solution is to pull the power cord, press the power button with the computer unplugged, then plug it in and turn it on Your battery might be dead, but if the computer used to freeze after 10 mins of it being on then the problem could be a fan. If the fan doesn't turn on, the laptop won't turn on either. I recommend you take it to a repair shop or, if you want to try yourself, check if the fan moves or if any noise is made when you push the power button Asus N56VZ Laptop screen won't turn on, after pressing Power button. my laptop dell inspiron 6400 take several times press up of power button to boot. when i press the power button it turns but t: I have gateway NE46RS1 model laptop with inbuilt battery. I can't turn on my laptop.when I press the power button the power O.K., now unplug the power cable from the power supply and press power button for 10 seconds. Gently remove the silver coin battery from the motherboard. If you know where they are, short-out the two pins with the jumper OTHERWISE just leave the computer unplugged for at least 10 minutes or longer. This will reset the BIOS setting to the.

Windows NT FAQ

Unplug the big black power cable from the back of the computer. If it's a laptop, remove the battery as well. Hold the 'on'/power button your computer. Wait 5 seconds. Press the power button to 'turn off' your computer. Plug in the big black power cable from the back of the computer again. Turn on your computer So uh i got a really weird problem, something that I've never encountered or heard of before in my many years of building computers. It happens COMPLETELY RANDOMLY, one morning i would wake up and my pc won't turn on, all LEDs on my motherboard are lit and if i even move my mouse the LEDS on the mouse will turn on like normal, but if i press the power button on my case, literally nothing would.

Quick press and release triggers a smart relay on the MB to turn on or off, depending on default or OS state, such as cold on, sleep on, turn off, sleep off, etc. Holding the button down for a long time is a default hardware power kill switch I would suggest first discharge your computer easily by the following steps: 1. unplug the power cord to your computer, pressing the power button on the computer do not let go. This will discharge the PC. 2. connect the power cord again, power on as usual. If still the same level 1. glassofcoldmilk. · 10m. Go to Menu, System, Off Timer Plus and and turn it Off, or set Turn Off After high, e.g. 16h. By default it goes to deep sleep mode after 1h or so, and you need to manually turn it back on to have picture, but if you disable off timer plus, it should wake up with PC. 1 Why does shutting down the computer, removing the AC Adapter, removing the battery (if it is a laptop), and holding down the power button for 30 seconds fix problems in one's computer. I was recently corrected in a post of mine that this does not actually do anything unless one removes the 3 volt battery from the motherboard, but I know this is. 1. U can try pressing the ON button either from the casing or motherboard simultaneously together with the PSU ON/OFF button (at the back of the PSU) and somehow it will kick start the motherboard/CPU after a while (like pressing ON/OFF ON/OFF ON/OFF at the PSU together with the on button at the casing) 2. You power down the PSU or remove the.

Only the Power Button Wakes PC from Sleep. My system: Win 10 64 bit Retail, MSI B150M Mortar, Intel i5-6500, Samsung 512GB SSD, Corsair 2 x 4 GB Memory, etc. Although my keyboard and mouse are allowed to wake the PC from sleep (in Device Manager), they don't wake the PC. Interestingly, pressing the Power Button on my Fractal R5 case does wake. Learn how to turn your computer on with just a flat head screwdriver, power supply and motherboard!Each motherboard is different, but you'll be looking for t..

Start by pressing the buttons of the power button . If you are more of a manual type, you can start the ZTE by unmounting it. We do not necessarily advise you to get this done, but know that it can oftentimes work. In the event you unmount the ZTE and remove the Power button, you should observe a small step from the Power button When you press the power button, the computer supplies power to its components—the motherboard, CPU, hard disks, solid state drives, graphics processors, and everything else in the computer. The piece of hardware that supplies power is known as the power supply.. Inside a typical desktop PC, it looks like a box at the corner of the case. Discussion power button on my Aspire t-780 suddenly doesn't turn on the computer unless I keep pressing it Author Date within 1 day 3 days 1 week 2 weeks 1 month 2 months 6 months 1 year of Examples: Monday, today, last week, Mar 26, 3/26/0 Similar threads; Question Laptop has a hard time starting up (need to press power button multiple times): Question Laptop won't start: Question Problem in starting power laptop toshiba c850: Question HP laptop will not boot unless I press any F key right after pressing the power button.: Question Laptop doesn't start, power led light is on: Question Please help my asus laptop wont start and. If the power button is lit and you can hear fans or noises but there isn't an image being displayed, turn out the lights to see if there's an image being displayed very faintly. 3. If there is a very faint image once the lights are off, the screen's inverter has failed and you'll need to replace it [4]

How to turn on (Start) a computer Without power buttonbuy Power Reset/on/off Switch Cable and HDD LED Light Cord:https://amzn.to/2vV9McUIn this tutorial I te.. Materials. Momentary SPST (Single Pole, Single Throw) Switch - Your most basic momentary switch, press/flip/turn it to close the circuit, release and it opens. 2 Pin Wire Harness - I found one with long leads but the easiest way to get one that you know will work is to just harvest the one from your current switch.(99% chance the problem is in the switch, not the wires. Press the Power button and there is no response on the screen, and Power light is ON. → please refer to Solution #2 ; Press the Power button and Image appears when the notebook startup but NO image (blank) after it enters desktop. → please refer to Solution #3. The power light is the indicator why your laptop does not power on When the computer turns off the screen it can't be turned off again, you have to do a hard shutdown by holding the power button for 10s. It doesn't matter if the screen is turned off due to sleep or by pushing a power button (action set to turn off screen), the effect is the same When I press the power button: Hibernate When I press the sleep button: Turn off the display When I close the lid: Sleep. Click on Save Changes at the bottom of the screen and navigate back to the previous page. Change Power Options; Now click the option Choose what closing the lid does . Choose what closing the lid doe

23 Jan 2019 #3. You can set in power settings to allow the button to shut down the computer. You should be using the shutdown in Windows, not the physical button. That way the OS can properly close things down and save certain settings. Powercfg flags allow you to check those properties. You need to also check the bios settings Try this simple and feasible solution with the below steps: Step 1: Press and then hold the power button of your system for 5 to 10 seconds until the PC is shut down completely. Step 2: Now, remove your complete system from power for 5 to 10 minutes. Unplug the power cord, and if you are working on a laptop, remove the battery too 6. Laptop won't turn on. Power button does nothing [G74SX-DH72] I have the g74sx-dh72 which is a pretty old model. Everything was working fine until one day, the laptop was acting up. While the laptop was turned on, even when I didn't press the power button, I get the dialog box below which appears only when the power button is pressed

Why is my PC not starting when I press the power button

NOTE: If you want to change what Windows does when you press the software Power button found in the Start Menu (in Windows 10 and Windows 7) or on the Start screen (in Windows 8.1), skip this first section and read the next sections from this guide. Regardless of whether you use Windows 10, Windows 7 or Windows 8.1, start by opening the Control Panel.. The power doesn't work on the single tap. Set the power button option to sleep as shown by brummyfan2. Then, push and hold the power button for exactly 4 seconds and Voila! Acer has made this change in order to keep the customers from accidentally tapping the power button and putting the computer to sleep When you press the power button on your computer's case, it doesn't suddenly cut power — it sends a signal to the operating system and tells it to shut down. The operating system can also understand multiple types of ACPI signals, which is how some laptops are able to have separate power and sleep buttons Power-on Pads or sometinhg they make power on without power button HP Presario CQ61 laptop doesn't have power-on pads like Mac laptops. If you suspect the power button failed, you can try replacing the power button board. Here's service manual for this laptop. The manual has step-by-step disassembly instructions Press and hold the power button on your Mac for at least 10 seconds, then release. If your Mac is turned on, this forces it to turn off. If you see no change on your Mac, press and release the power button normally. If your Mac now turns on but doesn't finish starting up, follow the steps for when your Mac doesn't start up all the way

On most computers, all you need to do to force shut down the computer is to press and hold down the Power button for a few seconds. Keep it held down until you see your machine powering off. Once that is done, you can press the same Power key to turn your machine back on. Windows provides you with multiple ways to shut down a computer Power Reset. A power reset can fix many issues causing a computer not to start up. Shut down your computer, disconnect all connected cables and devices and unplug the power cord. Remove the battery, then press and hold the power button for 15 to 20 seconds. Reconnect the power cord, then try to turn your computer on If that didn't work, connect the power supply that came with your Surface. When your Surface is plugged in with the original power cord, charge it for 15 minutes. Then press the power button to turn on your Surface. If the power connector light doesn't turn on, or if it flashes, see Surface battery won't charge or Surface won't run on battery If that doesn't work, it could be that the power supply in your PC has failed. If that's the case, you'll need to replace it. Before you do that, make sure that it is the power supply. If you can, remove the case and check that the power button is connected properly - a faulty button is much easier to fix than a power supply Also, long pressing the power button can restart your device, thereby possibly solving the issue. There is no harm in trying this solution. Pic. Press Power button or long press Power button Solution 3: Cool Acer Laptop Down. Sometimes, Acer laptop not switching on and gets overheated. That doesn't mean your Acer swift 3 laptops goes wrong

To do a power cycle: Shut down your Mac by pressing the power button (keep pressing) Unplug all the power cables. Hold the power button for 10 more seconds. Restart the Mac as usual. Hopefully, the Mac won't turn on issue is now fixed. 3. Rule out your display. In rare cases, it might be your display that's giving you all the trouble The emulator turned off, but I couldn't turn it back on again - despite trying long clicks on the power button and restarting the emulator. My solution was to close the emulator, then going into AVD Manager in Android Studio and selecting the Wipe Data option for this emulator. When I then restarted the emulator, it worked fine Disable Power Button To Turn Off Pc - posted in System Building and Upgrading: Hey, I don't know whether this is in the right forum but: How do I disable the Power Button for turning off the PC.

Computer doesn't turn on at all. When you plug the AC adapter into the laptop, there are no lights turning on at all. When you push on the power button, nothing happens. i have smsung rv509 laptop on pressing power button the mother board screen displays but the it keeps showing a black screen with cursor blinking on top corne Way 3: How to Restart iPhone without Power Button via AssistiveTouch. Using AssistiveTouch is also a common way to control your iPhone without any button, which replaces the Home button and Power button. Thus, it is a good choice for you to use AssistiveTouch, especially when your Power button or Home button is broken When I press the power button, nothing happens. No Power/No POST. Cause - Bad External Power Supply . 1. First be sure the External Power Supply is connected to both the PC and the electrical outlet. 2. Unplug the power supply from the electrical outlet, followed by the DC connection from the back of the PC. 3

How to Fix a Computer That Won't Turn O

Whenever I press the power button the fans all spin, four lights turn on and stay lit on the motherboard but the PC doesn't actually start. This just gets better and better! I've got the POST test card now and some of the lights stay lit on it but it doesn't seem to show any codes just four lines in the led display where the codes are meant to be The power on most notebook computers isn't like a wall switch. It can physically cut the power, but it also sends commands, including the command to go to sleep or to wake up. Sometimes, you need to really reset your computer to make the power button work. Unplug your computer's power supply and remove its battery using the above procedure When I press the power button to power the PC on, it's not working. If I use the on/off switch on my PSU and then press the power button quickly, the PC starts up. I usually do this for a few minutes before I manage to power it up. I've had the PC for a few months and the issues started last week When I turn the mains supply on the computer automatically comes on without touching the case's power button. When I shut down I have to then cut the power off by switching the mains off otherwise the computer comes back on. The power button has light but doesn't even work - holding it down when the computer crashed did nothing

It was as if nothing was connected to my screen. So I made sure my PC was on and it surely was, so I went to turn it off. I held the power button for 10+ seconds and nothing happened. My PC was running but it would not shut off, so I used the switch on my PSU as I tried for a few minutes and couldn't get the power button to work 2- If your BIOS supports there should be Switch on Password which will help you to power on your computer via keyboard by pressing correct combination of keys and disable power button by removing cable from mainboard. 3- Did you ever think of buying any Group Socket with Switch which will help you to cut electric from where it comes :D. Be well

Great, you solved the problem; now you need to install all the parts back in place, one by one (i.e., turn off the computer, put one part back, turn the computer on again and see if it is still. This helps in not wasting power unnecessarily. The good thing about the Windows sleep mode is that you can turn it on instantly. To turn on the PC, all you have to do is press the power button or lift the laptop lid. Though pressing the power button to wake the PC is no difficult task, you can make things a tad bit easier If you unplug the dryer and remove the rear access panel from the back, you will have access to the thermal fuse mounted on the blower housing. It is shown as number 7 in the diagram at the link below. CLICK HERE. That fuse has two wires going to it. With the dryer unplugged, remove those two wires and tape them together If the power-supply fan comes on and front LEDs light up, the problem may be one of the external devices. For a laptop, unplug the system, remove the battery, press and hold the start button for. LUX - an External Power Button: It's a lazy afternoon, and you sit down to turn your computer on, you either: a) you have to bend down and press the power button, or b) you have a laptop - this isn't for you.Especially where my (desktop) computer is located; under my desk and out

Hold down the power button. Hold the power button down for 10 seconds, then release and press the power button once as you normally would. Sometimes issues with the battery on the motherboard can be fixed with this method. If the unit turns on but won't boot into Windows, see Troubleshooting Windows Startup Problems Press and holding down the power button for 20 seconds or more. Then turn the device back on by hitting the power button again. If this doesn't work the first time, you can try holding the button down for 30 seconds or more. Most of the time, this will be all you have to do to get the Kindle Fire up and working again So the best solution might be to completely disable the power button and then use sleep/hibernate instead of turning your computer off. Could put it to sleep from the main menu, wake it up by moving the mouse or pressing a keyboard key. - Headcrab May 17 '18 at 1:4

Computer Won't Start

Check if the video cable is connected to the CPU firmly. If the monitor power indicator light is green but you still can't see a picture on the monitor, turn the computer off by pressing and holding the power button until it turns off. Once it's turned off, turn it right back on by pressing the power button on the CPU If your Android phone has a broken power button but you have a physical home button that you can press, the following key combination will turn it on. Volume Keys + Home Button. Make sure your phone is charged. Hold down both the volume up and down keys, and connect your phone to your PC. Next, while still holding down the volume keys, and with. Use the Dell power button lights to help diagnose problems with your Dell computer, such as a failing hard drive or a bad motherboard.Most newer models of Dell computers now have a diagnostic LED surrounding the power button on the from of the computer. When you press the power button to boot the PC, the light should be green and remain green under normal circumstances In the easy way to describe, when you press the power button, this 2 pin will be electrically connected to each other, and send the motherboard a signal to power on the system. To start the computer without using the power button, take out the Power SW, make sure you identify which 2 pins belong to the power button (refer to the label.

Sometimes in computers that run Windows 7 the following problem appears: When you try to do a shutdown, the PC doesn't turn off completely, with all fans and LED's remaining on (working) and the only way to power it off completely is to continuously press the Power button. In our case this problem appears on [ Pull out the power cord and wait for 15 seconds. Put the power cord back in. Wait five seconds, and then press the power button to start up your Mac. 6. Try Recovery mode when the Mac won't load. If the issue repeats and your Mac won't turn on again, you can try some of these: Set your Mac back using Time Machine 3. Remap Power Button using Third-party App. 4. Using ADB Commands (Requires USB Debugging) Tip- Hard Reset for Software Glitches. Wrapping Up: Turn On Android Without Power Button. The Power button can stop working for a variety of reasons. And as you'd acknowledge, it is tough to use a phone with a faulty power button Pressing the power button causes that LED to blink white, and it'll blink white once every time i press the power button. All that being said, the laptop does not power on at all. I removed the battery to try powering it on without it, same issue. I removed the RAM modules, same issue. Computer doesn't turn on in the morning, but works fine.

Pressing Power Button Sometimes Does Not Boot PC

Thanks for the reply, my power button doesn't appear to do anything, it won't power up pressing the button while the computer is running, and doesn't shut down pressing the button, sometimes it powers up when the computer is powered up, it only powers up while the computer is running if the power or usb cable is unplugged then reconnected This morning I press the power button and it won't turn on. When it feels like it's going to start, the power light comes on, I hear the fan, then it immediately stops. Doesn't get past a black screen. I have removed the power cord and battery multiple times, pushed and held power for 15-60 seconds to remove residual power, didn't work 1. Turn off your computer. 2. Disconnect your computer from the wall outlet. 3. Press the power button multiple times to clear any capacitors. 4. Find the CMOS battery on your motherboard. This is most commonly a CR2032 battery, a coin-sized battery as shown below. You'll find it near the PCI Express slots on most motherboards Press and hold the Volume up button and the Power button at the same time for about 15 seconds until the screen turns off, then release both of these two buttons. You need to wait 10 seconds after you release the buttons. After that, you can press the Power button to turn on your Surface device to see whether it is bootable now

SOLVED: When I press the power button, nothing happens

I promise! 3.) Next, unplug the power adapter from the wall AND from the computer .When your Acer laptop doesn't power up the problem could be worsened by leaving it plugged in. 4.) Now that the battery and adapter have been disconnected from the computer, you can move onto the solution. Hold down the power button for 45 seconds Press and hold these keys: Shift (on the left side), Control (on the left side), Option (Alt) (on the left side). While holding these keys, start pressing and holding the power button too. Keep holding them for 10 seconds. Then release all of the keys. Then press the power button to see if your Mac turns on. If you have a MacBook with a. I recently upgraded from Ubuntu 11.10 to 12.04. If it makes any difference, my system is a Dell Inspiron 1520. I encounter a problem whenever I shutdown or restart; it kills all running processes (as far as I can tell), but once I get past the shutdown text screen and the screen goes black, my computer doesn't power off

Solved: Computer won't power on - HP Support Community

6. Power Button. The power button is one of the potential culprits when your computer won't boot in Windows 10. If your computer won't power on but the motherboard light is on, the problem could be the power button or the wires that connect it to the motherboard. You can also turn on the system the same way you would with the power button. Press and hold the Power button for five seconds. Release the Power button. Insert the battery back into your Mac, and then plug in your Mac to the charger. Press the Power button to turn on your.

Doesn't turn on when pressing the power button even when fully charged. Doesn't turn on even after turning off the hold function. Doesn't function normally. The display on the Walkman player is blank. The Walkman player does not turn off. Troubleshooting. If you need model specific information to complete any step, check your product manuals After removing the battery, press and hold the Power button on your computer for 15 seconds to drain residual charge (if any). 5. Insert the Battery back into its compartment and Press the Power button to turn on the computer. 6. On the startup menu, select Start Windows Normally option and press the Enter Key on the keyboard of your computer When your HP laptop won't turn on with unknown reasons, you can make use of the BIOS setting to repair it. Step 1: First of all, press and hold Power button for 5 seconds to shut down the computer. Step 2: Power on the computer and press F10 key immediately and repeatedly until you see the BIOS setting window