Home

How to open boot menu in Windows 10 HP laptop

What Is HP Boot Menu? How To Access Boot Menu Or BIO

Turn on/restart the HP laptop. Press Esc or F10 to enter BIOS settings menu when you see the HP boot menu. (The HP BIOS button for some computers may be F2 or F6.) Click Storage and select Boot Options Use the BIOS settings to enable or disable Secure Boot on an HP business notebook or workstation computer. Turn off the computer. Press the power button to turn on the computer, and then immediately press the Esc key repeatedly until the Startup Menu opens. Select BIOS Setup (F10), and then press Enter. Select the Advanced tab, and then select. Windows users usually access boot menu by pressing keyboard boot menu key in the keyboard when their personal computer is booting up. Note: Common boot menu keys to access the boot menu are F2, F10, F12, Delete, Esc, etc. HP Boot Menu Key in Windows 10/8.1/

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10's advanced start menu recovery settings How to boot from USB Windows 10. 1. Alter the BIOS sequence on your PC so your USB device is first. In most instances, the BIOS will usually not be automatically set to your device. If you skip this step, your computer will start regularly from your hard drive instead of getting boot information from your USB device HP Laptops On Amazon - https://amzn.to/3wboBVLHP Spectre x360 - https://amzn.to/3dCflTZPLEASE SUBSCRIBE IF THIS HELPS YOU - IT HELPS ME :-)Here is a very qui.. Press and hold F8 as soon as the computer restarts. You'll need to press it before the Windows logo appears. Continue holding this key until you see the Advanced Boot Options menu. If Windows boots to the desktop, repeat this process to try again

To navigate the boot menu of Windows 10, follow this procedure step by step. Click the Start button. A window will open as the following image is showing. Now click the Power button and choose the Restart option as highlighted in the above image You might need to open the Troubleshoot menu to access the BIOS, repair Windows 10, or boot in Safe Mode. If there us a System-critical problem, Windows will restart in Safe mode automatically I recently had a battery problem with my notebook, now fixed, but in the process of accessing the boot up options menu a few times, it now display EVERY time the PC starts. The menu I am talking about is the one which says: Startup menu. F1 System Information. F2 System diagnostics. F7 HP sparekey recovery. F9 Boot menu options. F10 BIOS setu

How to Install Windows 10 on HP Notebook 15 from USB

III - Use Command Prompt to access Windows 10 boot options. If you are interested, you can also use a quick Command Prompt command to access the advanced boot options. Right-click on the Windows 10 Start menu and select Command Prompt (Admin) from the menu. In the Command Prompt window, type shutdown.exe /r /o and hit Enter Use the Windows 10 search box to search for HP Recovery Manager and click to open it. Depending on the model of your computer and its configuration, your Recovery Manager screen might vary. Not all options are available on all models and configurations Getting access to BIOS on HP laptop is pretty simple. You just need to boot your computer, and then tap the right Boot Menu Key. The following describes the detailed steps. Step 1:Boot your HP laptop This should open the HP Startup Menu . Choose F9 to open Boot options. This time (hopefully) you will see the USB or the DVD as available. Select the thumb drive or the DVD as a boot option. Follow the on-screen instructions to install Windows 10 . Please, let me know how it goes - provide your feedback/reply and don't hesitate to post agai

What Do The Function Keys (F1 ~ F12) Do On Windows 10

HP PCs - Secure Boot (Windows 10) HP® Customer Suppor

Click Restart Now button under the Advanced start-up section. The computer should restart and enter recovery mode. 3. Using Restart Option in Start Menu. This is another option to boot into WinRE if you can boot into Windows. Click on the Start Menu and click on the Power icon. Press and hold the Shift key as you click on the Restart option Change boot-order to boot from USB in HP Laptop. Turn your HP laptop off or restart it. While the screen of your Laptop is blank Press F10 to enter into BIOS settings menu. Now go to Boot Settings and Follow the on-screen instructions to change the Boot order to USB. Finally, Reboot and install Ubuntu You should restart the computer and press F12 (Fn + F12) during the booting process to get the boot menu. Tip: The boot menu key varies on different computer brands. You can read this post to learn more information about entering BIOS on Windows 10/8/7 (HP/Asus/Dell/Lenovo, any PC). What is Lenovo boot menu and how to enter it

Changing laptop's boot settings Restart your computer, en repeatedly press F10 to get into the boot menu of HP Omen laptop. Go to boot options and enable Legacy boot. This will also disable.. Turn on the computer and immediately press the escape key repeatedly, about once every second, until the startup menu opens. From the startup menu, you can access system information and diagnostics. Full guide to boot from usb in hp elitebook 840. Then, press the asus boot menu key to open asus laptop boot menu Technical Level: Intermediate Summary Microsoft recently released an updated build of Windows 10 Technical Preview. One of the discovered bugs in the new build of Windows 10, if you have a dual boot setup with an older version of Windows such as Windows 7 or Windows 8.1, this menu goes missing after upgrading to the latest build

HP Computer Boot Menu Key in Windows 8/8

  1. However, most computers made in the past four years boot Windows 10 far too quickly to listen for a keypress at startup. To access your BIOS on a Windows 10 machine, you must follow these steps
  2. List of Boot Menu Hot-Keys In this article, you'll find out what keyboard key you'll need to press in order to access your computer's boot menu or BIOS menu. The keys vary from computer to computer, so be sure to check what key works for yours
  3. Access hp bios settings and boot menu options by pressing f10/f9 keys on windows 10 hp laptop. The file name is passed on the command line. Most of bios of hp laptops and desktops can be entered by pressing f10 or esc
  4. If Windows 10 fails to start several times in succession, you're eventually taken to the Troubleshoot menu where there are multiple options/tools at your disposal to fix the problem. If you're on your desktop, you can go to the Settings app and under the recovery options, you can access the troubleshoot menu

At the Windows desktop, open the Start Menu and click on Settings (The cog icon) Select Update and Security. Select Recovery from the left-hand side menu. Under Advanced Startup click on the Restart Now button on the right-hand side of the screen. The computer will restart and boot to an Options Menu The Windows Boot Manager (BOOTMGR) is a very important tool for managing Windows 10 boot menu. It also comes in handy when your computer runs into boot problems. I hope you found this Itechguide helpful. If this guide helped you resolve your boot problem, let me know by completing the Leave a Reply form at the end of the guide

[SOLVED] Windows 10 - Laptop won't go into sleep mode

How to Enter BIOS Setup on Windows PCs HP® Tech Take

How to Boot from a USB Drive on Windows 10 PCs - H

  1. Follow the steps below to Boot Windows 10 in Safe Mode using the System Configuration Utility. 1. Right click on the Start button and click on the Run. 2. On the Run Command Window, type msconfig and click on OK. 3. On the next screen, click on the Boot tab, select Safe Boot with Minimal option and click on OK
  2. Windows 8 and 10 consolidate various boot options into a single screen named the Advanced Options menu. This menu provides access to repair tools and options for changing Windows startup behavior—such as enabling debugging, booting into safe mode, and launching into a recovery environment
  3. I've got a 2018 HP laptop, 14 inch with Windows 10 and Ubuntu dual boot. I used to press F9 to choose which OS I wanted and I have done for a few weeks now. Solution: Shutdown and press F10 to go into BIOS. Navigate to the part of BIOS which lists the boot order. Press enter on OS boot manager. use F5 or F6 to switch Ubuntu with Windows. Save.

HP Laptop Startup Boot Menu - Quick Guide - YouTub

If you can't boot your HP laptop, you can also reset it using Windows Recovery in Safe Mode. Visit Insider's Tech Reference library for more stories . 10 Things in Tech: Get the latest tech trends. Step 6: Wait until the USB installation media is completed. After that, connect the USB drive to the Asus computer and power on the computer. Then, press the Asus boot menu key to open Asus laptop boot menu. From the menu, choose the USB drive and press Enter. Then, your computer can boot from the USB

1 Press the Win + R to open the Run dialog, type msconfig into Run, and click/tap on OK to open System Configuration. 2 Click/tap on the Boot tab, select the boot loader entry (ex: Windows 7) you want to delete on the boot options menu, and click/tap on the Delete button. (see screenshot below) Make sure the boot loader entry (ex: Windows 7) you want to delete is not currently set as the. Only Windows Boot Manager is available in your PC boot menu while trying to reinstall Windows 7 over your preloaded Windows 10 or Windows 8/8.1 via a bootable USB drive (or USB stick) So if you want to do above things, you would have to disable secure boot in Windows 10/8.1/8 at first. Follow 2 steps below to make your computer secure boot disabled (or enabled). Step 1: Access UEFI BIOS Setup in Windows 10/8.1/8. Step 2: Disable/Enable secure boot in UEFI firmware settings Now, open the Power Options window, and re-attempt the steps again. You should be able to tweak what opening the lid of the laptop does. Fix 2 - Restore Defaults in Power Options. Just Open power options again and click on restore defaults. Fix 3 - Using Registry editor. 1. Press Windows key + R together to open registry editor. 2 Step 5: The recovery drive will be created automatically.You need to wait for some time since it may take a long time. When the creation process finishes, click Finish.. Step 6: Now, unplug the USB drive and connect it to the unbootable Toshiba computer. Step 7: Restart the computer repeatedly until it starts up.Once it boots, keep pressing the Toshiba satellite boot menu key to enter the BIOS.

3 Ways to Get to the Boot Menu on Windows - wikiHo

3 ways to open Windows 10 boot menu - FAQforg

  1. Part 2: Boot HP Computer from CD Via Boot Option Menu. Insert USB flash drive to computer and restart the computer. when Vender logo appears, press Boot Menu Key (F9) to enter Boot Option Menu; Use the up or down arrow key to select the USB flash drive, and then press Enter. If you failed to enter Boot Menu, reboot and try again
  2. To repair a faulty computer that may even not boot, one commonly used way is to factory reset Windows 10 from boot. It means to reinstall Windows 10 while keeping all the manufacturer installed programs and drivers, or in short, restore your system to factory settings from startup. As thus, you can fix major system problems at the root
  3. d that the BIOS key can vary for different laptop/PC models. Step 3: Once you're in the BIOS menu, navigate to the Boot Mode and set its value to UEFI. Step 4: Go to the Exit menu and choose Save and Exit to apply your changes
  4. The Boot Menu is a menu accessible when a computer is first starting up. It can contain many different device options to boot to, including CD, DVD, flash drive, or hard drives, and a LAN (network). The Boot Menu allows a user to load up other operating systems or applications, even if the computer itself already has an operating system on it
  5. hello, i'm new in Linux so first i install Ubuntu 1710 from USB Flash Drive every thing was perfect the problem is when i shutdown and restart my Laptop (hp pavilion 15 notebook) it directly run windows 10 (booting menu) appear so in boot options secure boot disable legacy boot disable..
  6. HP Recovery If Windows Does Not Boot Normally. If your HP computer will not boot and you need to revert the computer to a factory state or attempt to repair it, then do the following: Restart the computer and immediately begin tapping the F11 key. Under Choose an option, select Troubleshoot. Click Reset this PC
  7. Know when to use this method. If your computer came preinstalled with Windows 8, 8.1, or 10, use this method to boot from the CD. If you upgraded your current computer from Windows 7 or earlier to Windows 8 or later, use the method in the next section.. The reason for this is that newer computers use UEFI (Unified Extensible Firmware Interface) instead of the traditional BIOS (Basic Input.

Video: How to Boot to the Windows 10 Troubleshoot Menu Laptop Ma

Solved: HP Omen startup menu at boot - HP Support

  1. Dual-boot Installation. As mentioned, my only reason for leaving Windows 10 on the PC was to experiment with dual-booting Windows 10 and Linux on a UEFI firmware-based PC. I installed Ubuntu Budgie, rebooted, and the laptop booted straight into Windows 10-no GRUB menu, and so on
  2. Step 2: Boot locked HP laptop from USB drive and remove HP laptop windows 10 password. Follow the article how to set computer boot from USB drive to boot locked HP laptop from USB drive. When Windows 10 Password Genius runs on locked HP laptop and reloads all user accounts, you can select the user and click Reset Password button to remove.
  3. (2) Boot your HP laptop, and press the Esc key to get into BIOS settings. (3) Press F9 key to open Boot Device Options menu, and select the USB flash drive, and then press Enter to boot it. 3. Reset password for your HP laptop (1) When the Cocosenor Windows Password Tuner program opens, select the system on your HP laptop, and your user name
  4. Step 1. Restart your computer and you may see a screen that says, Press F12 Boot for boot Menu or Press Del for Setup. Step 2. Once you have entered the boot menu, you can use the up and down arrows to select the device you want to boot from. If you were unable to enter the boot menu, you may not have that feature on your computer
  5. Select 4 or F4 to start your personal computer in Safe Mode. If you must use the Internet, select 5 or F5 for Safe Mode with Networking. From outside of Windows: After the third attempt to boot has failed, Windows 10 will automatically boot into the Windows Recovery Environment (WinRE). Follow these steps to enter Safe Mode

Access to Boot Options Menu via Run dialog menu. 1) Open Run dialog box by pressing Win + R (Windows logo key and R key) at the same time. Then Type shutdown /r /o into the box and hit Enter. 2) Click Close when You're about to be signed out prompt shows up. Wait for seconds then you would access to Boot Options Menu 6 Ways to Access BIOS in Windows 10 (Dell/Asus/ HP) Make sure to create a restore point just in case something goes wrong. If you have access to your Desktop. If your Windows operating system is functioning properly and you have access to your desktop, below mentioned methods will get you access of BIOS in Windows 10 Replacing Windows 10's graphical boot manager with Windows 7's Legacy bootloader is a pretty simple process, and the following are the exact steps that you need to perform in order to do so:. Right-click on the Start Menu button to open the WinX Menu or Hold the Windows Key and Press X. Click on Command Prompt (Admin) to launch an elevated Command Prompt To access the UEFI settings, you'll need to go to your Windows 10 Settings menu. Right-click the Start menu button and select Settings to do this. In the Windows Settings menu, click Update & Security > Recovery. Under the Recovery tab, press the Restart Now button under the Advanced startup section. This will boot Windows 10 into the.

5 Ways to Access Windows 10 Boot Options Menu River Net

How to Change Boot Order in Windows 10 from Advanced System Settings. Right-click Windows 10 Start menu and click System. Then, on the System About page, scroll down to Related settings and click System info. On the left pane of the View basic information about your computer page, click Advanced system settings Open a command line, either as an administrator from inside Windows, or by booting to a command line using the Windows installation disk and presssing Shift+F10, or by booting to Windows PE ( WinPE: Create USB Bootable drive ). Add boot options for a Windows operating system. Reboot the PC. Now, the boot menu will show both menu options Change the boot order in Windows 10 via System Configuration. Step 1: Type msconfig in the Start/taskbar search field and then press the Enter key to open the System Configuration dialog. Step 2: Switch to the Boot tab. Select the operating system that you want to set as the default and then click Set as default button. Click the Apply button Boot menu in windows 10, 7 or 8 widely used for upgrade or downgrade current windows version and most of the time for change primary boot device, Time, Date, Settings and also other system configurations. that we can't manage from our Windows laptop or desktop settings for system panel or control panel While in the Advanced startup environment, use the following steps to use Startup Repair: Click the Troubleshoot button. Click the Advanced options button. Click the Startup Repair button. Select.

ASUS, HP and ACER laptop battery calibration programs and

HP PCs - Performing a System Recovery (Windows 10) HP

  1. These partitions contain the EFI or the boot information or recovery information. If you view a list of volumes on your HDD or SSD via Command Prompt, or via the Disk Management utility on Windows 10, you will be able to see the size of these partitions, and how many there are
  2. Windows 10 Advanced Boot Options - System BIOS Boot Keys. It's work for all Windows 10 system. So just try to enable it from Windows system Settings. ASUS Boot Options Keys. ESC (Boot Selection Menu) F2 (BIOS Setup) F9 (Asus Laptop Recovery) Apple Laptop Boot Options Keys. Command + Option + P + R (PRAM and NVRAM Reset) Command + S (Boot.
  3. Let's have a look at the step-by-step guide of entering BIOS in Windows 10 laptops using Settings. Step 1: If you have your laptop switched on, press the Windows Start button or click the Start icon on the bottom-right of your screen. Next, type in settings and hit Enter to open the Settings window. Or, you can press the Windows + I key.
  4. Windows 8.1/10. Press WinKey+X to open the Quick Link menu. Click Shut down or sign out, then hold down Shift and click Restart. (In Windows 10 you can also open the Start menu, click on Power and then Shift -click Restart .) Click Troubleshooting and then Advanced options to bring up the repair options
  5. Method 1- via Settings. Gain access to UEFI settings via Settings in Windows 10. 1- Open the start menu. 2- Select Settings. 3- Next, select the Update and Security option. 4- Once the window opens, click on Recovery. 5- You will be able to see Advanced Start up. Under Advanced Start Up , click on Restart Now
Can not find toolbox for HP color laserjet 1600 with

A Detailed Method to Enter/Access/Get into BIOS on Hp Lapto

Immediately start tapping the Boot Menu key on your keyboard once every second or faster while your computer is restarting. Keep tapping the Boot Menu key until you see the Boot Menu or the Boot Device Options on the screen. Each computer brand has a boot menu that looks slightly different from the others. Here are some examples: 12 You can also reach UEFI BIOS on your Windows 10 PC, laptop, or tablet from the Run window. There are several ways to access it, but we prefer the Windows + R shortcut. In the Open field, type in shutdown /r /o /f /t 00 and then press Enter on your keyboard or click or tap on OK. Enter the command in the Run window

Change Boot Sequence and How to Boot from USB - HP Support

However, some people may click the right key at the right time, but still do not see the Boot Menu. If this is your case, you need to seek for an alternative way to boot Windows from CD/DVD/USB flash drive. The best way to do it is to restart the computer, enter Bios setup and set your computer to boot from CD/DVD/USB Flash Drive 4. press esc > only option: f1 BOOT 5. pressing f1 doesnt do anything (only removes the option) 6. tried everything to get into bios, cant open it 7. Linux live (from usb) can boot just fine (when disconnecting hard drive) 8. windows 10 installation usb yields same results as in point 3. (with hdd disconnected On the Install Windows screen, select Next > Repair your computer. On the Choose an option screen, select Troubleshoot. On the Advanced options screen, select Startup Repair. After Startup Repair, select Shutdown, then turn on your PC to see if Windows can boot properly Method 1: Change OS Name in Dual Boot Menu from Command Prompt. Open the Command Prompt as administrator. Type bcdedit and hit Enter. Have a look at the Windows Boot Loader sections, you can see the identifier and description for each operating system installed on your computer. Make note of the identifier for the OS you want to rename

How to Open the Boot Menu of a Computer Your Busines

The Boot Menu can have different names for the external media: 1. +Removable Devices 2. +Hard Drive 3. CD-ROM Drive. Method #3 - If none of the above work, check that the BIOS/UEFI settings are correct and you can move the USB item at the top of the list in the Boot Device Select Menu. With this method, you'll be forcing your computer to always boot from a USB flash drive first and. D (Boot from OS/X Recovery and perform Hardware Test) N (Boot from Network) Dell. CTRL + F11 (Dell™ PC Restore by Symantec) F8 (Repair Your Computer) Dell Factory Image Restore. EI Systems. F10 (System Recovery) Fujitsu. F2 (BIOS Setup) F12 (Boot Menu) Gateway. F11 or R (Gateway Recovery) HP / Compaq Desktops. F10 (HP Recovery) HP Pavilion. A lot of users facing trouble as the Windows 10 version 1803 update changes the settings and auto-enable the Fast Boot option. To disable it again, you need to open up the Control Panel. You can write it down in the Start menu search box or in the Run window to launch it

HP PCs - Secure Boot (Windows 10) | HP® Customer SupportTurn off touch screen on Windows 10 HP laptops - HP

Windows10 boot menu automatic opening - Microsoft Communit

The following steps may help you perform clean boot in Windows 8 and 10. Press thei Windows + R key to open a Run box. Type msconfig and click OK. On the General tab, click Selective startup. Clear the Load startup items check box. Click the Services tab. Select the Hide all Microsoft services check box (at the bottom). Click Disable all. Enter BIOS Using Command Prompt. As mentioned above, you can also enter BIOS or UEFI Settings in Windows 10 using the Command Prompt. 1. Open Command Prompt (Admin) on your computer. 2. On the Command Prompt screen, type shutdown /r /o /f /t 00 and press the Enter key on the keyboard of your computer. 3 Step 5, Create Partition for Second System (Space For Dual Boot Windows 10 or Ubuntu) This is the last step to successfully set up the Dual Boot Windows 10 System. 1st, Right-click on the This PC option and select the Manage option. It will open the Computer Management window. Select Disk Management. 2nd, Next, Right-click on your Drive To put the Samsung laptop to safe mode in Windows 8/8.1/10/11 or to boot Windows 8/10 in recovery mode use the Method 1 that is mentioned above in this article. Alternatively, open the command prompt with admin privilege and use the command bcdedit /set {bootmgr} displaybootmenu yes Command Prompt - Bootrec.exe tool. User having a windows-installation CD can do this: Step 1: Boot their Lenovo PC from the windows disc. You can use any disc of Windows 7, 8, or 10. Step 2: Go to the option Repair your computer then Troubleshoot > Advance options and then reach Command Prompt option

HP Envy 14 Review « wracky

How To Install Windows 10 on HP Notebook 15 from USB

From within Windows, press and hold the Shift key and click the Restart option in the Start menu or on the sign-in screen. Your PC will restart into the boot options menu. Select the Use a device option on this screen and you can choose a device you want to boot from, such as a USB drive, DVD, or network boot. READ NEXT How To Reinstall Windows 10 On A Lenovo Laptop Rarely, Windows might need a clean install. We've uploaded a few steps on how you could clean install Windows. This guide is specific to Lenovo laptops. We also have guides for HP and Dell laptops. HP Guide Dell Guide Part 1: Download what you'll need. Step A: Use Microsoft's free Windows 10 Installation Media tool, to create a Windows 10 boot. When you can't open Settings to get into safe mode, restart your device from the Windows sign-in screen. On the Windows sign-in screen, press and hold the Shift key while you select the Power > Restart. After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.You may be asked to enter your BitLocker recovery key 10,610. 19. Oct 27, 2016. #2. Turn your laptop on, and intermediately press ESC button until start menu appears, then press F9 to select the boot device. If you want always to start the ubuntu, you should change in the bios options. Regards

What is the boot menu key for HP laptops? - Quor

The new shortcut will appear on your computer's Desktop. In order to get it to launch at boot, we simply need to add it to the Startup folder in the Start menu. Go to Start>Programs and then right-click the Startup folder. Next, select Open from the menu. Now that the folder is open, just drag the shortcut you created into the folder and drop it In the earlier version of Microsoft Windows like Windows XP, Vista, and 7, it was quite easy to access safe mode by just pressing F8 or Shift+F8 repeatedly, but in Windows 10, Windows 8 & Windows 8.1 advanced boot menu is OFF. With an advanced boot menu enabled in Windows 10, you can easily access the boot menu by pressing the F8 key

2. Connect the notebook to a power source using the power adapter. 3. Press and hold the Windows key and the B key at the same time while the computer is off. 4. While still pressing the Windows key and the B key, hold down the Power button on the notebook for one second, and then release the Power button and the keys Now you will see how to access Toshiba Satellite Windows 10 BIOS when your computer is able to boot normally as below. Step 1: Click the Start menu in the desktop, on the left side of your computer. And then click the Settings menu, which is easy to find. Step 2: After that, you will see the 9 submenu items of Settings, just click the Update. Safe mode in Windows 10 or 8.1 boot menu. Step 1: Open Command Prompt as administrator. To do so, type CMD in Start menu search box and then simultaneously press Ctrl+Shift+Enter keys. Alternatively, on Windows 10, type CMD in Start menu search box, right-click on Command Prompt entry and then click Run as administrator option. If you're on. 6. You have successfully added Chrome OS to the boot menu along with Windows 10. You can also move Chrome OS to the top by clicking on the arrow icon. Finally, click on Apply. 7. Now, restart your computer, and this time, you would find both Chrome OS and Windows 10 in a Grub2Win interface. Select Chrome OS and it will take. Assuming that your laptop or desktop system comes pre-installed with Windows 10 or Windows 8.1 or 8 you should enter the UEFI menu and disable the following settings: Secure Boot and Fast Boot features. If the computer has no pre-installed OS and you intend to use Linux and Windows in dual-boot, first install Microsoft Windows and then proceed. Fix Dual Boot system booting straight to Windows. Though I'm referring to Windows 10, the steps are equally valid for Windows 8 and 8.1. Similarly, I'm using Ubuntu in dual boot here, but the trick applies to all other Linux distributions such as Linux Mint, etc. Step 1. In Windows, go to the menu